Your Cart

Embedded:

Description

New Life Radiology presents the most advanced CBCT technology – CONE BEAM COMPUTED TOMOGRAPHY – the biomedical imaging technique for the acquisition of volumetric images of the dental arches. CBCT System represents a valid support for the realization of interventions in implantology, general/maxillofacial surgery, periodontology, endodontics and ATM.

Flat panel CMOS sensor 13 x 13 cm active area with 100nm pixel size

Available real FOV 9×9, 11×11, MULTIFOV (9×9, 11×11, 6×11, 5×5) (not stitching)
Newly developed geometric calibration
Post-processing function for 2D images obtained with 3D sensor

Same sensor for 2D and 3D images: 2-in-1 solution

An efficient two-in-one solution to obtain 2D 13 x 30 cm and Volumetric 9 x 9 (or 11 x11 or MULTIFOV 9×9, 11×11, 6×11, 5×5 cm) images in just 10 seconds.

A flat panel CMOS sensor with an active area of ​​13 x 13 cm, a resolution of 100 microns and an acquisition capacity of 300 frames: with these special features, the acquisition of an ideal image database for the volumetric construction of an image with FOV 9 cm (diameter) x 9 cm (height) is guaranteed (or 11×11, or MULTIFOV 9×9, 11×11, 6×11, 5×5, depending on the chosen configuration)

Xelis: the software for plant planning

A unique tool to assist you in implant surgery:

  • Detect cross-sections of the dental arch for preliminary assessment of the implant and subsequent developments
  • Clearly indicates the correct position and size of the system to be used
  • Accurately visualize nerve channels and determine the angle of surgery more effectively

XELIS features a simple interface that helps assess numerous clinical pathologies including fractures, impacted teeth, periodontitis and TMJ.



Xelis
advanced implant DBM



​(Axial, Panoramic, Cross Section)
DLB – Dynamic Light Box
Image stitching
Report – Captured Image
Management and Report generation
DICOM Print and CD burning
Net environment, optional multi user up to 10 users


Xelis
basic implant DBM​

Technical specifications for Opera 3D:

3D PANORAMIC
Sensor type CMOS
Sensor area 13 x 13 cm
Exposure time 14.3/15.0 sec (Child/Adult, standard PAN)
IMAGE PROGRAMS PAN Adult
panoramic Child panoramic
3-layer focal option PAN
TMJ closed/open mouth
Sinus
Sector panoramic
– Emi panoramic R
– Emi panoramic L
– Low dose pan (optional)
– Ortho panoramic (optional)
– Incisors
– Bitewing R – Bitewing L – Bitewing r + L (optional)
Patient selection: Adult/Child, 3 sizes for all modes
3D IMAGE
Imaging modes Dentition, TMJ R, TMJ L
Field of view 9 x 9 cm (height x diameter) (or 11×11, or MULTIFOV 9×9, 11×11, 6×11, 5×5, depending on the chosen configuration)

Detector pixel size 100µm (200µm in 2×2 binning)
Voxel size 121 µm
Acquisition rate 2 frames per degree
Tube head rotation 230
Dynamic range 14 bit grey level (max 16,384)
Number of frames acquired 460
Scan time/exposure time 12.2 sec/8.5 sec
CEPHALOMETRIC IMAGING
Sensor type DIGITAL FLAT PANEL DR Amorphous Silicon
Image format 24cm x 30cm maximum
Exposure type Single shot DR
Acquisition time Immediate
Setup and exposure time 200ms-500ms
CEPH PROGRAMS L/L
P/A
A/P
Carpus projection

XRay Generator

Generator type High frequency DC
Focal point 0.5 mm
Total filtration > 2.5 mm Aleq @ 70 kV)
Stray radiation According to IEC 60601-2-63:
Anode voltage from 61 to 85 kV, step 3 kV
Anode current from 4 to 10mA 9 steps
Weight 110Kg
Dimensions (HxWxD) 2230mm x 1720mm x 1070mm

Recently viewed products